Dalies kontūras


    • Monday 24th:
      1. Rebuild Castor Bot with touch sensor
      - instructions


    • Tuesday 25th and Wednesday 26th:

      1. Touch Sensor Program Demo - Begin Flow Charting
      2. Switches, Loops - Notes and Practice Programs
      - Loop demo (sound)
      - Swithces - sound
      - Cascading switches (sound)
      - Cascading switches (autobot)
      - Remote Control Bot

    • Thursday 27th & Friday 28th:
      1. Demos - Data wires & variables
      2. Counter Program Demo Begin       Finish Counter Bot Demo
      3. Pick a number game
      4. Introduce Random Numbers - Bounce Random Bot Demo

    • Monday 1st:
      1. Finish Pick a number game.

      2. Bounce random bot.

      2. Work on TableBot Challenge

    • December 2nd:

    • TableBot Challenge Puslapis

    • Tuesday 2nd - Friday 5th:
      1. Work on and complete table bot challenge.

      2. Tablebot demo program

      3. Begin Ultrasonic Sensor lab.


    • Monday 8th - Wednesday 10th:
      Complete Tablebot Challenge

      Ultrasonic Sensor - Field of view lab

      Due - Thursday 11th - beginning of class.

      - resource website

    • Wednesday 10th to Monday 15th:
      2. If complete work on the following 3 programs using the Ultrasonic sensor.
       

       - Cylinder finder and pusher
                  - using your ultrasonic sensor, find and object within about 50cm of your robot. Your robot will stop. Then approach the object and push it along the table.
                  - if can is no longer visible to the robot, the robot will stop, backup, and search for another cylinder to push.

       - Variable Speed
                - robot will be set with an initial speed of 100%. Robot will slow down as it approaches and object. Speed will be equal to the distance from the object.
                  e.g. distance >=100cm : speed = 100      distance = 32cm : speed = 32  

       - Wall Follower
                - Robot is able to follow along the edge of the walls of the room without touching the walls. Robot needs to take into account corners and other walls it may run into.

    • Monday 5th
      1. Introduce Colour Sensor
      2. Demo Program - ambient light
      3. Demo Program - Reflected Light
      4. Demo Program - Light activated Robot
      5. Demo Program - Colour Detector

    • Tuesday 6th:
      1. Colour sensor tasks (ensure you demonstrate all completed tasks for Mr. Bennett so that he can mark them as completed)
       - Write and test program to have robot stop when a specified colour is detected (Red)
       - Write and test program to have robot count 5 lines of a specified colour - then stop (continually display the count on screen)
       - Write and test program to have robot count red lines and green lines, continually displays the separate count of each on screen, ignores black lines and stops after detecting a yellow.
       - Write a program to have robot follow a black line across the table (robot must be able to follow in both directions) 

    • Monday 12th:
       - Sumo Robots must be completed and ready for matches on Tuesday 20th.

    • SumoBot Challenge Puslapis